10/39 RING & PINION GEARSET

NEW - #1966226 (~10/1982),-1985 5-SPEED,
10/39 RING & PINION GEARSET.
RING GEAR MOUNTING BOLT IS 12 MM IN DIAMETER.
Please note that differential ring & pinion gear set designs have changed over the years depending upon gear manufacturer. The pinion depth shim may need to be internally beveled to clear the shaft to gear bevel, otherwise damage to the pinion shaft, and a broken shim, or other damage could occur. Always put a dab of grease on the surface between the shim and the pinion gear and then rotate the shim with your fingers to confirm that the faces meet all the way around before pressing on the bearing!
IF OUT OF STOCK THIS ITEM CAN BE RESTOCKED FROM ITALY IN 4-8 WEEKS. TO MAKE SURE WE GET ONE FOR YOU PLEASE FILL OUT & RETURN THE SPECIAL ORDER FORM FOUND HERE, PLUS INCOMING FREIGHT & US CUSTOMS CLEARANCE CHARGES. 10/41 USE 5926996, 12/43 USE 5990198. CARRIER BEARINGS USE 7546497. PINION BEARINGS USE 4139528 & 848610. CRUSH SLEEVE USE 5924109. PINION SEAL USE 40000770. COVER GASKET USE 4430509. AXLE SEALS USE 40000810. BEFORE USE 4443641.
REPLACES 241106.
So you can estimate your shipping costs from www.ups.com or www.usps.com (this form required for all US Post shipments http://www.fiatplus.com/postal-agreement-pg-6.html ), this item weighs less than 9 pounds, and can be shipped in a 12 x 9 x 7 box.
*